Jaguar XE Forum banner
1 - 7 of 7 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #3 ·
German gearbox specialist ZF has announced the start of production of its second-generation eight-speed automatic transmission.

ZF says the new '8HP' transmission has been optimized for the requirements of modern engine technology with a focus on downsizing and down speeding, as many engines are now turbocharged, feature fewer cylinders and produce their maximum torque at a very early stage.

The company claims a number of developments have helped improve the transmission's efficiency by up to three per cent.

ZF says the gear sets have been optimized and now have a higher spread (from 7.0 to 7.8), which it claims reduces speed by 50 revolutions per minute and fuel consumption by one per cent.

Internal losses have also been reduced by the introduction of new multi-disc separation strategies, with additional springs integrated into the multi-disc packages to ensure the friction shift elements are almost fully opened and cause less drag.

The transmission's oil pump now operates with a reduced pressure, down from 5 to 3.5 bar, requiring less energy overall.

A new innovation of the 8HP is the clutch is now fully opened during deceleration and when the vehicle is stationary, which ZF says means it is now no longer necessary to "'brake' against the drive".

The transmission's 'coasting' function - the uncoupling of the gearbox and simultaneous stopping of the engine - now operates at speeds up to 160km/h. ZF has also further optimised the stop/start function, with the engine now stopping immediately as the vehicle stops, rather than waiting 1.5 seconds as in the original eight-speed.

New advanced torsional vibration dampers claim to eliminate the vibrations that occur on the engine side, isolating them from the driveline and the body.

The second-gen ZF 8HP entered volume production in July, debuting in the BMW 520d as the 8HP50 version that is designed for torque outputs up to 500Nm. An 8HP75 version will join ZF's portfolio in the future for torque outputs up to 750Nm. ZF says the transmission will eventually be rolled out in more than 1000 different automotive applications.

laurie
 

·
Registered
Joined
·
425 Posts
Interesting to note that ZF supplies several components for the XE:

Chassis Components:

The chassis is one of the most complex - and most important - systems in a car. It determines the driving dynamics of the car. Steering, wheel control, bearing, damping, spring, stabilizer and brake system all determine a vehicle's character. In addition, the vehicle's NVH (noise, vibration, harshness) behavior, ensuring that vibrations and noise are not felt or heard in the vehicle while driving, is improved. This ensures that passenger comfort increases.

Transmission system:

6-Speed Manual Transmission

8-Speed Automatic Transmission

Clutch System

Torque Converter (for auto box)

See here for details:

https://www.zf.com/global/en_de/stars_by_zf_data/stars_by_zf_cars.html#model=29569=27646
 

·
Registered
Joined
·
799 Posts
Have the ZF in my 535d. It's been flawless for 130k+ miles with 580Nm running through it. Even the XE S only has 450Nm so I'm sure it will last at least as well in the XE
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top