Jaguar XE Forum banner

F-Type wheels on an XE?

4K views 3 replies 3 participants last post by  pauljobr 
#1 ·
Seen a set of wheels I like, but I think they were originally from an F-Type... Genuine Jaguar Orbits.

8.5J fronts, ET50, fitted with 245/40 R19 tyres
9.5J rears, ET27, fitted with 285/35 R19 tyres

I believe the XE has ET45 all round as standard? I'm wondering if these would fit, possibly with a different tyre size?
 
#2 ·
Yeah I checked that out when I took the centrifuges off my F Type, unfortunately the rears are too big and would rub. i would have liked them on the XE, they look pretty flash, and I still have them sitting in the shed over 2 years later.
 
#4 ·
The ET for the rear changes depending on wheel rim size, the wider the rim the bigger the offset, on a 7J rim it is 45/46 but on a 9J rim you would need an offset of 61, based on the factory spec wheels available.
Your only option would be to put a spacer on the rear but then it might stick out beyond the bodywork.

If you use the following website you can get an idea of how they will fit
https://www.willtheyfit.com/
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top